Silicone rubber sheet is a very special material, which is widely used, including the construction industry. Therefore, it is used when building and renovating houses.
So, what kind of profile is the silicone rubber sheet? What are the silicone rubber uses and characteristics?
Silicone rubber sheets are actually made of silicone rubber, and silicone rubber sheets can be divided into two categories: organic silicone rubber and inorganic silicone rubber. Inorganic silicone rubber is a highly active adsorption material. It is finally made by reacting sodium silicate and sulfuric acid after a series of treatments such as aging and acid foaming.
Silicone rubber is also an amorphous substance. It is insoluble in water and other solvents, non-toxic and tasteless, and will not react with any substances other than strong alkali and hydrofluoric acid.
Silicone rubber sheets are also widely used and can be used as special materials in aviation, cutting-edge technology, and military technology sectors, as well as in construction, electrical and electronic, textiles, automobiles, machinery, leather and paper, chemical light industry, metal and paint, medicine and medical treatment and other fields.
(1) Product features: it has good insulation performance, aging resistance, sealing performance, and good adhesion and high strength. It is a non-corrosive one-component room temperature vulcanized silicone rubber. Within the temperature range, long-term use of it will not cause any problems.
(2) Application: the main silicone rubber sheet uses are insulation, moisture-proof, sealing, bonding, shock-proof, etc., such as bonding and sealing materials for semiconductor equipment, electronic appliances and other equipment.
It is also used in sealing materials for aircraft cockpits, instrument cabins, and related parts in machine manufacturing. This material is also a very ideal material for elastic adhesives in fields such as aviation, electronics, and electrical manufacturing.
The surface of the product needs to be cleaned first. First, clean up the rust, dust, oil, etc. adhered to the silicone rubber sheet. Then start gluing, unscrew the hose, install the plastic nozzle. And then the blade is then used to make the opening with the desired size. This makes it easy to squeeze the glue to the desired position.
After use, the next step is to wait for curing, and then put the coated parts in a stable position and wait for curing.
When curing, it is cured from the outside to the inside. The curing depth of the silicone rubber sheet is 2 to 4mm. It needs to be cured within 24 hours and the humidity is 55%. If the depth exceeds 4mm, the time will be extended. If the humidity is relatively low, the curing time will be extended.